Skip to content

Pricing

Pick how often we collect

Three plans, priced by pickup schedule. Choose the one that matches how fast you fill a bin.

Plan 01

Every 2 weeks

$49/month

For busy print farms and shops that fill a bin in two weeks or less.

Choose plan
Plan 02

Monthly

$35/month

For shops that fill a bin in about a month.

Choose plan
Plan 03

When the bin is full

$30/pickup

For shops that take more than a month to fill a bin. Tell us when it's full; pickups are at least 5 weeks apart.

Choose plan

Every plan includes

  • Separate labelled bins for PLA and PETG
  • Pickup across the GTA
  • A yearly report of how much plastic you kept out of landfill

Questions

How does “When the bin is full” work?
Email info@spoolback.ca when your bin is full and we'll collect it within 5 business days. You pay $30 per pickup and nothing in between. Pickups are at least 5 weeks apart.
What if I fill a bin faster than that?
Then the monthly or every-2-weeks plan is the better fit, so your bins never overflow between pickups.
Which plan should I choose?
Busy print farms usually fill a bin every couple of weeks. Smaller shops and schools often fill one in a month or more. Not sure? Email info@spoolback.ca and we'll help you pick.
How many spools does 1 kg of scrap make?
About three-quarters of a standard 1 kg spool. Roughly 20 to 30% of the plastic is lost along the way: dust and fines from shredding, moisture driven off in drying, and the start-up and purge material every extrusion run produces. So 1 kg of failed prints, supports and purge gives about 0.7 to 0.8 kg of recycled filament, and 4 kg of scrap fills about 3 spools.